Rust Book Lab: Unit and Integration Tests

RustRustBeginner
Practice Now

This tutorial is from open-source community. Access the source code

Introduction

Welcome to Test Organization. This lab is a part of the Rust Book. You can practice your Rust skills in LabEx.

In this lab, we will learn about the two main categories of tests in the Rust community: unit tests, which are small and focused on testing individual modules in isolation, and integration tests, which use the public interface of the library and potentially exercise multiple modules per test.


Skills Graph

%%%%{init: {'theme':'neutral'}}%%%% flowchart RL rust(("`Rust`")) -.-> rust/BasicConceptsGroup(["`Basic Concepts`"]) rust(("`Rust`")) -.-> rust/DataTypesGroup(["`Data Types`"]) rust(("`Rust`")) -.-> rust/FunctionsandClosuresGroup(["`Functions and Closures`"]) rust(("`Rust`")) -.-> rust/MemorySafetyandManagementGroup(["`Memory Safety and Management`"]) rust(("`Rust`")) -.-> rust/DataStructuresandEnumsGroup(["`Data Structures and Enums`"]) rust(("`Rust`")) -.-> rust/ProjectManagementandOrganizationGroup(["`Project Management and Organization`"]) rust/BasicConceptsGroup -.-> rust/variable_declarations("`Variable Declarations`") rust/DataTypesGroup -.-> rust/integer_types("`Integer Types`") rust/FunctionsandClosuresGroup -.-> rust/function_syntax("`Function Syntax`") rust/FunctionsandClosuresGroup -.-> rust/expressions_statements("`Expressions and Statements`") rust/MemorySafetyandManagementGroup -.-> rust/lifetime_specifiers("`Lifetime Specifiers`") rust/DataStructuresandEnumsGroup -.-> rust/method_syntax("`Method Syntax`") rust/ProjectManagementandOrganizationGroup -.-> rust/module_system("`Module System`") subgraph Lab Skills rust/variable_declarations -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/integer_types -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/function_syntax -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/expressions_statements -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/lifetime_specifiers -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/method_syntax -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} rust/module_system -.-> lab-100417{{"`Rust Book Lab: Unit and Integration Tests`"}} end

Test Organization

As mentioned at the start of the chapter, testing is a complex discipline, and different people use different terminology and organization. The Rust community thinks about tests in terms of two main categories: unit tests and integration tests. Unit tests are small and more focused, testing one module in isolation at a time, and can test private interfaces. Integration tests are entirely external to your library and use your code in the same way any other external code would, using only the public interface and potentially exercising multiple modules per test.

Writing both kinds of tests is important to ensure that the pieces of your library are doing what you expect them to, separately and together.

Unit Tests

The purpose of unit tests is to test each unit of code in isolation from the rest of the code to quickly pinpoint where code is and isn't working as expected. You'll put unit tests in the src directory in each file with the code that they're testing. The convention is to create a module named tests in each file to contain the test functions and to annotate the module with cfg(test).

The Tests Module and #[cfg(test)]

The #[cfg(test)] annotation on the tests module tells Rust to compile and run the test code only when you run cargo test, not when you run cargo build. This saves compile time when you only want to build the library and saves space in the resultant compiled artifact because the tests are not included. You'll see that because integration tests go in a different directory, they don't need the #[cfg(test)] annotation. However, because unit tests go in the same files as the code, you'll use #[cfg(test)] to specify that they shouldn't be included in the compiled result.

Recall that when we generated the new adder project in the first section of this chapter, Cargo generated this code for us:

Filename: src/lib.rs

#[cfg(test)]
mod tests {
    #[test]
    fn it_works() {
        let result = 2 + 2;
        assert_eq!(result, 4);
    }
}

This code is the automatically generated tests module. The attribute cfg stands for configuration and tells Rust that the following item should only be included given a certain configuration option. In this case, the configuration option is test, which is provided by Rust for compiling and running tests. By using the cfg attribute, Cargo compiles our test code only if we actively run the tests with cargo test. This includes any helper functions that might be within this module, in addition to the functions annotated with #[test].

Testing Private Functions

There's debate within the testing community about whether or not private functions should be tested directly, and other languages make it difficult or impossible to test private functions. Regardless of which testing ideology you adhere to, Rust's privacy rules do allow you to test private functions. Consider the code in Listing 11-12 with the private function internal_adder.

Filename: src/lib.rs

pub fn add_two(a: i32) -> i32 {
    internal_adder(a, 2)
}

fn internal_adder(a: i32, b: i32) -> i32 {
    a + b
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn internal() {
        assert_eq!(4, internal_adder(2, 2));
    }
}

Listing 11-12: Testing a private function

Note that the internal_adder function is not marked as pub. Tests are just Rust code, and the tests module is just another module. As we discussed in "Paths for Referring to an Item in the Module Tree", items in child modules can use the items in their ancestor modules. In this test, we bring all of the test module's parent's items into scope with use super::*, and then the test can call internal_adder. If you don't think private functions should be tested, there's nothing in Rust that will compel you to do so.

Integration Tests

In Rust, integration tests are entirely external to your library. They use your library in the same way any other code would, which means they can only call functions that are part of your library's public API. Their purpose is to test whether many parts of your library work together correctly. Units of code that work correctly on their own could have problems when integrated, so test coverage of the integrated code is important as well. To create integration tests, you first need a tests directory.

The tests Directory

We create a tests directory at the top level of our project directory, next to src. Cargo knows to look for integration test files in this directory. We can then make as many test files as we want, and Cargo will compile each of the files as an individual crate.

Let's create an integration test. With the code in Listing 11-12 still in the src/lib.rs file, make a tests directory, and create a new file named _tests/integrationtest.rs. Your directory structure should look like this:

adder
├── Cargo.lock
├── Cargo.toml
├── src
│   └── lib.rs
└── tests
    └── integration_test.rs

Enter the code in Listing 11-13 into the _tests/integrationtest.rs file.

Filename: tests/integration_test.rs

use adder;

#[test]
fn it_adds_two() {
    assert_eq!(4, adder::add_two(2));
}

Listing 11-13: An integration test of a function in the adder crate

Each file in the tests directory is a separate crate, so we need to bring our library into each test crate's scope. For that reason we add use adder; at the top of the code, which we didn't need in the unit tests.

We don't need to annotate any code in _tests/integrationtest.rs with #[cfg(test)]. Cargo treats the tests directory specially and compiles files in this directory only when we run cargo test. Run cargo test now:

$ cargo test
   Compiling adder v0.1.0 (file:///projects/adder)
    Finished test [unoptimized + debuginfo] target(s) in 1.31s
     Running unittests src/lib.rs (target/debug/deps/adder-
1082c4b063a8fbe6)

1 running 1 test
test tests::internal ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

   2 Running tests/integration_test.rs
(target/debug/deps/integration_test-1082c4b063a8fbe6)

running 1 test
3 test it_adds_two ... ok

4 test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

   Doc-tests adder

running 0 tests

test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

The three sections of output include the unit tests, the integration test, and the doc tests. Note that if any test in a section fails, the following sections will not be run. For example, if a unit test fails, there won't be any output for integration and doc tests because those tests will only be run if all unit tests are passing.

The first section for the unit tests [1] is the same as we've been seeing: one line for each unit test (one named internal that we added in Listing 11-12) and then a summary line for the unit tests.

The integration tests section starts with the line Running tests/integration_test.rs [2]. Next, there is a line for each test function in that integration test [3] and a summary line for the results of the integration test [4] just before the Doc-tests adder section starts.

Each integration test file has its own section, so if we add more files in the tests directory, there will be more integration test sections.

We can still run a particular integration test function by specifying the test function's name as an argument to cargo test. To run all the tests in a particular integration test file, use the --test argument of cargo test followed by the name of the file:

$ cargo test --test integration_test
    Finished test [unoptimized + debuginfo] target(s) in 0.64s
     Running tests/integration_test.rs
(target/debug/deps/integration_test-82e7799c1bc62298)

running 1 test
test it_adds_two ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

This command runs only the tests in the _tests/integrationtest.rs file.

Submodules in Integration Tests

As you add more integration tests, you might want to make more files in the tests directory to help organize them; for example, you can group the test functions by the functionality they're testing. As mentioned earlier, each file in the tests directory is compiled as its own separate crate, which is useful for creating separate scopes to more closely imitate the way end users will be using your crate. However, this means files in the tests directory don't share the same behavior as files in src do, as you learned in Chapter 7 regarding how to separate code into modules and files.

The different behavior of tests directory files is most noticeable when you have a set of helper functions to use in multiple integration test files and you try to follow the steps in "Separating Modules into Different Files" to extract them into a common module. For example, if we create tests/common.rs and place a function named setup in it, we can add some code to setup that we want to call from multiple test functions in multiple test files:

Filename: tests/common.rs

pub fn setup() {
    // setup code specific to your library's tests would go here
}

When we run the tests again, we'll see a new section in the test output for the common.rs file, even though this file doesn't contain any test functions nor did we call the setup function from anywhere:

running 1 test
test tests::internal ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

     Running tests/common.rs (target/debug/deps/common-
92948b65e88960b4)

running 0 tests

test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

     Running tests/integration_test.rs
(target/debug/deps/integration_test-92948b65e88960b4)

running 1 test
test it_adds_two ... ok

test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

   Doc-tests adder

running 0 tests

test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0
filtered out; finished in 0.00s

Having common appear in the test results with running 0 tests displayed for it is not what we wanted. We just wanted to share some code with the other integration test files. To avoid having common appear in the test output, instead of creating tests/common.rs, we'll create _tests/common/mod.rs. The project directory now looks like this:

├── Cargo.lock
├── Cargo.toml
├── src
│   └── lib.rs
└── tests
    ├── common
    │   └── mod.rs
    └── integration_test.rs

This is the older naming convention that Rust also understands that we mentioned in "Alternate File Paths". Naming the file this way tells Rust not to treat the common module as an integration test file. When we move the setup function code into tests/common/mod.rs and delete the tests/common.rs file, the section in the test output will no longer appear. Files in subdirectories of the tests directory don't get compiled as separate crates or have sections in the test output.

After we've created tests/common/mod.rs, we can use it from any of the integration test files as a module. Here's an example of calling the setup function from the it_adds_two test in _tests/integrationtest.rs:

Filename: tests/integration_test.rs

use adder;

mod common;

#[test]
fn it_adds_two() {
    common::setup();
    assert_eq!(4, adder::add_two(2));
}

Note that the mod common; declaration is the same as the module declaration we demonstrated in Listing 7-21. Then, in the test function, we can call the common::setup() function.

Integration Tests for Binary Crates

If our project is a binary crate that only contains a src/main.rs file and doesn't have a src/lib.rs file, we can't create integration tests in the tests directory and bring functions defined in the src/main.rs file into scope with a use statement. Only library crates expose functions that other crates can use; binary crates are meant to be run on their own.

This is one of the reasons Rust projects that provide a binary have a straightforward src/main.rs file that calls logic that lives in the src/lib.rs file. Using that structure, integration tests can test the library crate with use to make the important functionality available. If the important functionality works, the small amount of code in the src/main.rs file will work as well, and that small amount of code doesn't need to be tested.

Summary

Congratulations! You have completed the Test Organization lab. You can practice more labs in LabEx to improve your skills.

Other Rust Tutorials you may like